A Season of Warmth
Solid brass six-arm floral glass chandelier on a white background
Solid brass eight-arm floral glass chandelier on a white background
Solid brass ten-arm floral glass chandelier on a white background
Solid brass twelve-arm floral glass chandelier on a white background
Gold-finished iron six-arm floral glass chandelier on a white background
Gold-finished iron eight-arm floral glass chandelier on a white background
Gold-finished iron ten-arm floral glass chandelier on a white background
Gold-finished iron twelve-arm floral glass chandelier on a white background
Six-arm floral glass chandelier installed in a traditional living room
Eight-arm floral glass chandelier in a warm modern living room
Ten-arm floral glass chandelier installed in a bright living room
Twelve-arm floral glass chandelier in a spacious double-height living room
Close-up of a frosted floral glass shade and E27 socket
Close-up of the brushed gold central chandelier body
Close-up of the round gold ceiling canopy and downrod
Load image into Gallery viewer, Solid brass six-arm floral glass chandelier on a white background
Load image into Gallery viewer, Solid brass eight-arm floral glass chandelier on a white background
Load image into Gallery viewer, Solid brass ten-arm floral glass chandelier on a white background
Load image into Gallery viewer, Solid brass twelve-arm floral glass chandelier on a white background
Load image into Gallery viewer, Gold-finished iron six-arm floral glass chandelier on a white background
Load image into Gallery viewer, Gold-finished iron eight-arm floral glass chandelier on a white background
Load image into Gallery viewer, Gold-finished iron ten-arm floral glass chandelier on a white background
Load image into Gallery viewer, Gold-finished iron twelve-arm floral glass chandelier on a white background
Load image into Gallery viewer, Six-arm floral glass chandelier installed in a traditional living room
Load image into Gallery viewer, Eight-arm floral glass chandelier in a warm modern living room
Load image into Gallery viewer, Ten-arm floral glass chandelier installed in a bright living room
Load image into Gallery viewer, Twelve-arm floral glass chandelier in a spacious double-height living room
Load image into Gallery viewer, Close-up of a frosted floral glass shade and E27 socket
Load image into Gallery viewer, Close-up of the brushed gold central chandelier body
Load image into Gallery viewer, Close-up of the round gold ceiling canopy and downrod

Vintage Floral Glass Petal Chandelier

$539.00

12% OFF

Buy 1

M12

15% OFF

Buy 2

M15

18% OFF

Buy 3+

M18

$60 OFF

Orders over $330

M60

$100 OFF

Orders over $500

M100
Only 9999 item(s) left in stock
Question

Question

Shipping info

Shipping info

Return Policy: You have 14 days after receiving your order to request a return.

Availability: We ship to the United States.

Processing Time: Order handling time is 1 – 2 business days (Monday to Friday).

Free Shipping
14-Day Returns
Secure Payment
Customer Service
Sculpted glass and curved metalwork

Petal-shaped glass shades soften a sweeping chandelier frame

Each frosted glass shade has an organic, rippled edge, paired with curved gold-toned arms and a clean round canopy.

Frosted floral glassTranslucent petal shades bring texture to the fixture even when unlit.
Curved multi-arm silhouetteAvailable in 6, 8, 10, and 12-arm configurations for different room proportions.
Brushed gold-toned structureChoose solid brass or gold-finished iron to suit the desired material and budget.
Eight-arm floral glass chandelier in a warm modern living room
A floral focal point overhead

Designed for rooms that need presence without sharp edges

The flowing arms and softly ruffled glass work naturally above living areas, dining tables, bedrooms, and generous entry spaces. Select the diameter to keep the fixture in proportion with the room and furniture below.

Configurations and specifications

Compare all eight available variants

Use the arrows or pagination dots to view each material and arm-count combination.

Product Type Multi-arm chandelier
Frame Materials Solid brass or iron with gold-toned finish
Shade Material Frosted glass
Configurations 6, 8, 10, or 12 arms
Fixture Height 20 cm / 7.87 in
Diameter Range 56-103 cm / 22.05-40.55 in, depending on variant
Ceiling Canopy 15 cm / 5.91 in diameter
Downrods 10 + 20 + 30 cm / 3.94 + 7.87 + 11.81 in, connectable during installation
Socket E27, one socket per arm
Voltage 100-240V
Bulbs Not included
Installation Hardwired ceiling installation by a qualified electrician
Care Switch off power; dust glass and metal with a soft dry cloth

Bulbs are not included. Light color, brightness, and dimming behavior depend on the compatible E27 bulbs selected by the customer and are not fixture attributes.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size
CLEARANCESIZE↔PROPORTION · PLACEMENT

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Starting fixture diameter

26 in / 66 cm

With a 9 ft ceiling, a 7 ft clear path leaves about 24 in for the complete drop.

Complete drop = canopy + suspension + fixture body. This is a planning allowance, not a product specification.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 inTABLETOP → LOWEST POINT
30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure
Measure the tabletop, including its width at the widest point.
Size & place
For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check
Center on the table and check the view across it while seated.
30–36 inEVEN CENTERS · CLEAR SHADE GAPSCHECK THE FULL ROW BEFORE DRILLING
30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure
Record counter length, width and the working area below.
Size & place
Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check
Mark equal centers; verify the actual gap between shades rather than using center spacing alone.
ROOM LENGTH12 ft + 14 ft → ABOUT 26 in WIDE
Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure
Record length, width and finished ceiling height.
Size & place
Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check
Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.
LAY OUT EQUAL BAYSEND OFFSET ≈ HALF THE CENTER SPACING
Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure
Mark the full walking route, doors and changes in ceiling height.
Size & place
Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check
Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.
MATCH THE USER’S FACE LEVELSCONCE CENTER ≈ 65–70 in ABOVE FLOOR
Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure
Record mirror dimensions, side wall space and cabinet swing.
Size & place
For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check
Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.
TEST FROM A SEATED POSITIONSHADE HIDES THE BULB · SWITCH WITHIN REACH
Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure
Measure the mattress, nightstand and your seated position.
Size & place
Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check
Check reach to the switch, head movement, pillows and any adjustable arm.
LIGHT FROM BESIDE OR BEHINDKEEP THE BULB OUT OF DIRECT VIEW
A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure
Sit in your usual chair with a book before locating the lamp.
Size & place
Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check
Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.