- 27%

Load image into Gallery viewer, Petal Glass Plug-In Pendant

Petal Glass Plug-In Pendant

$195.00 $142.00

In stock

Size: Dia 28cm x H 13cm / ∅ 11″ x H 5.1″ (2 hooks)

Dia 28cm x H 13cm / ∅ 11″ x H 5.1″ (2 hooks)

Colour: Pink

Pink

Clear

Green

Plug Options: US plug

US plug

UK plug

AU plug

EU plug

Only 9999 item(s) left in stock

Quantity

Free Shipping

14-Day Returns

Secure Payment

Customer Service

Petal Glass plug-in pendant over a dining table by day

On / Off

Petal Glass

Flower glass. Soft glow.

Petal-shaped glass in pink, clear, or green—paired with warm copper hardware. Hang it over the table, bedside, or reading corner without hardwiring.

Plug-in pendant 177 in / 450 cm wire Dimmer compatible

Shade colors

Details

Petal glass, warm metal

Ribbed glass and copper-toned hardware—details that hold across every shade color.

Close-up of illuminated Petal Glass shade

Glow

Lit from within

Warm light fills the translucent petals, softening the room without harsh glare.

Shade

Ribbed petal form

A wavy glass rim and fine radial texture catch daylight even when the bulb is off.

Cord

Fabric wire & switch

Twisted fabric cord with an in-line switch—ready to plug in once hung.

Styled scenes

Wherever you need soft light

Living room, bedroom, study, and dining—one plug-in pendant that finds its place.

Petal Glass pendant over a living room coffee table

Living room accent

Hung over the coffee table—a soft accent for the living room.

Petal Glass pendant above a bedroom nightstand

Beside the bed

At the bedside for reading—plug in, no ceiling box needed.

At the desk

Over the desk—soft downward light for reading or work.

Petal Glass pendant over a round dining table

Over the table

Centered above the dining table—ambient light for meals.

Plug-in design

Hang it. Plug it in.

Use the adjustable fabric cord and hooks to set the height, then plug into a nearby outlet—no hardwiring needed.

177 in / 450 cm adjustable plug-in wire

In-line switch on the cord for easy on/off

US / UK / AU / EU plug options

Sloped-ceiling ready up to 30°

Petal Glass plug-in pendant hanging with fabric cord to the wall

Specifications

Product details at a glance

Size, finishes, and plug options at a glance.

Petal Glass pendant dimension diagram 28cm by 13cm

Product type

Pendant lamp

Size

Dia 28 cm × H 13 cm / ∅ 11″ × H 5.1″ (2 hooks)

Shade colors

PinkClearGreen

Plug options

USUKAUEU

Materials

Glass & copper

Voltage

AC 110–240V

Wire

Plug-in — 177 in / 450 cm adjustable

Dimming

Dimmer compatible (dimmer not included)

Sloped ceiling

Compatible up to 30°

Bulbs

Not included

Monulo · The practical guide

Lighting that fits.
A room that feels right.

Find a starting size, see where to place it, and know what to check before installation.

Find your starting size

01 · Get the scale right

A useful starting point, in seconds.

For a central ceiling light, enter your room dimensions. For lights above furniture, use the table or island guide below instead.

Measure first, then mock up the actual shape. Suggested dimensions are design starting points; product instructions and applicable local requirements take priority.

02 · Look up

Work with your ceiling.

The available drop matters as much as the fixture diameter.

Around 8 ft / 2.44 m

Keep it close

Start with a flush or compact semi-flush design in walking areas. Check the complete installed height.

Around 9–10 ft / 2.74–3.05 m

Balance the drop

Pendants become easier to accommodate. Reserve enough clearance below the lowest part of the fitting.

Above 10 ft / 3.05 m

Scale with intention

Test larger forms or longer suspension. Confirm cable length, access for maintenance and ceiling support.

Sloped ceiling? Compatibility is model-specific. Confirm the canopy, suspension angle and required drop before ordering.

30–36 in / 76–91 cm above the tabletop

Room study 01

Dining table

Let the furniture define the focal point.

Measure: Measure the tabletop, including its width at the widest point.
Size & place: For a round fixture, test a diameter around ½–⅔ of the table width. For a linear design, start with ½–⅔ of its length.
Check: Center on the table and check the view across it while seated.

30–36 in / 76–91 cm above the counter

Room study 02

Kitchen island

Plan the whole row before choosing the quantity.

Measure: Record counter length, width and the working area below.
Size & place: Try two or three paper shade outlines. Adjust their widths until adjacent edges and both island ends have breathing room.
Check: Mark equal centers; verify the actual gap between shades rather than using center spacing alone.

Start with at least 7 ft / 213 cm walking clearance

Room study 03

Room center

Use the room formula as a visual starting point.

Measure: Record length, width and finished ceiling height.
Size & place: Add length and width in feet; use that total as a starting diameter in inches. Example: 12 + 14 → 26 in / 66 cm.
Check: Check the furniture plan and the fixture’s visual weight. This formula does not determine brightness.

Keep doors, stairs and walking routes unobstructed

Room study 04

Hallway & entry

A consistent rhythm works better than a crowded ceiling.

Measure: Mark the full walking route, doors and changes in ceiling height.
Size & place: Divide the usable corridor into equal bays. Place each light near a bay center, leaving half a bay at each end.
Check: Choose the final distance from the fixture’s light output and beam spread; test the layout after dark.

Position paired lights symmetrically beside the mirror

Room study 05

Bathroom vanity

Put comfortable facial lighting first.

Measure: Record mirror dimensions, side wall space and cabinet swing.
Size & place: For side sconces, trial the luminous center around 65–70 in / 165–178 cm above the floor.
Check: Adjust to the actual user and mirror. Check for bright reflections and confirm the correct location rating.

Use an adjustable mock-up before fixing wall lights

Room study 06

Bedroom & bedside

Choose the height from where you actually sit.

Measure: Measure the mattress, nightstand and your seated position.
Size & place: Try the shade at seated eye or shoulder height so the bright source is screened and the page is lit.
Check: Check reach to the switch, head movement, pillows and any adjustable arm.

A deeper or diffused shade can improve comfort

Room study 07

Reading & living

Light the page without exposing the source.

Measure: Sit in your usual chair with a book before locating the lamp.
Size & place: Place task lighting beside or slightly behind the shoulder. Add separate ambient lighting to soften contrast.
Check: Keep the base and cord out of traffic; check glare from both the chair and nearby seats.

03 · Before the tools come out

One installation checklist.

Bring the product instructions, room measurements and fixture weight to your installer.

01 / Fit

Mock up the final position

Check door swings, seated views, shade gaps and the lowest point. Include the canopy and suspension in every drop measurement.

02 / Support

Verify the mounting

Have a qualified installer confirm the box, fixing points and structural support for the complete fixture weight.

03 / Compatibility

Match the electrical details

Confirm supply voltage, lamp or LED driver, dimmer compatibility, ceiling type and location rating for the exact model.

Hardwired fixtures should be installed by a qualified electrician following the supplied instructions and local requirements. This page explains planning and placement; it does not provide wiring instructions.

04 · The last few details

Questions before you choose.

Which measurement should I use for the drop?

Measure vertically from the finished ceiling to the lowest point of the assembled fitting. Over a table or counter, measure the remaining gap from that point to the surface.

Does a larger light always mean a brighter room?

No. Diameter describes the physical size. Compare lumen output, shade opacity, beam direction and the room’s other light sources separately.

How do I choose between two or three island pendants?

Start with the shade diameter, then draw the complete row to scale. Two larger shades and three small shades can both work; use actual edge gaps and counter-end clearances to decide.

What if my ceiling is too low for the light I like?

Compare a shorter suspension or a flush alternative that the manufacturer supports. Never shorten a rigid stem or modify wiring without the appropriate product guidance.

Can any fixture go in a bathroom or on a sloped ceiling?

No. Check the exact product specification and installation position. Ask a qualified installer to confirm the required damp or wet rating and canopy compatibility.

What should I send when asking for sizing advice?

Include a room photo, ceiling height, room or furniture dimensions, the fixture link and your proposed installation location. For heavier fittings, include any available mounting information.

Monulo · Plug-in pendant lighting

No Ceiling Wiring?
No Problem.

Add a pendant to your favorite corner without a dedicated ceiling electrical connection.

Explore plug-in pendants

Flexible placementPlug-in convenienceRoom-friendly design

01 / Two ways to power a pendant

Plug-In vs. Hardwired Pendant Lights

The difference starts with your power source—and the way you want the room to work.

Plug-In Pendant

Power: A cord and plug connect to a compatible wall outlet.
Installation: No dedicated ceiling supply, but suitable hanging support is still needed.
Placement: More options where the outlet, cord route and secure fixing points allow.
Best suited to: Local lighting, room refreshes and homes where changing fixed wiring is impractical.

Hardwired Pendant

Power: Connects directly to the building’s electrical supply.
Installation: Needs a suitable electrical connection and mounting, confirmed by a qualified installer.
Placement: Usually stays at a planned ceiling connection; relocation can involve electrical work.
Best suited to: Permanent layouts and a clean ceiling finish with less visible cord.

Love flexibility? Consider plug-in. Prefer a seamless ceiling finish? Consider hardwired. Both need secure mounting suited to the fixture and the surface.

02 / Make room for a little more light

One Light, More Ways to Live

Bring a focal point to a bedside, a favorite chair, a rental corner or the place where ideas take shape.

Milk glass plug-in pendant beside a bed and nightstand

Bedside

Disc plug-in pendant over a comfortable reading chair

Reading corner

Ceramic plug-in pendant with a visible cord in an apartment living room

Rentals

Colorful plug-in pendant over a home work table

Home office

Check your lease before adding hooks or drilled fixings. Cord length and support still need to match the exact product.

Discover the bestsellers

03 / A little planning goes a long way

Find the Right Spot for Your Pendant

Start at the outlet, work toward the hanging point, and include the final drop in your measurements.

Planning illustration only. Cord routing and load support must follow the exact product instructions. A cord may only be part of a suspension system where the manufacturer explicitly designs and rates it for that use.

Find your outlet

Check outlet position, plug type and supply voltage against the product. Keep the plug accessible.

Choose your height

Test the lowest point above the chair, bedside or table. Keep heads, doors and walking routes clear.

Plan your cord route

Measure A + B + C along the actual route, with enough allowance for bends and the specified installation. Compare this with the usable cord length before ordering.

Confirm the support

Use the manufacturer-specified suspension hardware and fixings appropriate to the ceiling, wall and fixture weight. Confirm included hardware on the product page.

Keep cords out of walkways, moving furniture and door gaps. Do not improvise load support, conceal flexible cords inside walls, or modify the plug. If the route does not work with the supplied cord, ask about a suitable model before buying.

04 / Start with your room

Which Pendant Light Fits Your Space?

Choose the connection that fits the room you have and the way you want to use it.

Situation A

No ceiling connection where you need it?

If a compatible outlet and secure hanging point are available, compare cord length, plug type and mounting details.

Consider plug-in

Situation B

Already have a ceiling connection?

For a fixed position with minimal visible cord, have an installer check the existing supply and support.

Consider hardwired

Situation C

Adding light to one small area?

A bedside or reading corner can benefit from a plug-in pendant when a clear cord route and suitable fixing points are available.

Explore a local plug-in setup

Situation D

The outlet is a long way away?

Measure the complete route first. If it crosses traffic or exceeds the usable cord, consider hardwired lighting or another placement.

Measure before choosing

05 / Before you choose

A Few Things to Know

Do plug-in pendant lights need ceiling wiring?

Plug-in models draw power from a compatible outlet rather than a dedicated ceiling electrical supply. They still need suitable mounting and suspension as described in the product instructions.

Do I need an electrician or a ceiling junction box?

A plug-in model typically does not use a ceiling electrical junction box for power. Mounting requirements vary. If the setup needs new wiring, an outlet change or any hardwired connection, use a qualified electrician; ask an installer for help when support is uncertain.

Are plug-in pendant lights easy to install?

The steps depend on the exact fixture and surface. Hooks, anchors, brackets or drilling may be required. Read the product instructions and confirm the hardware before purchase.

Can I use a plug-in pendant in a rental?

It can be an option when rewiring is not practical, but it is not automatically damage-free. Check your lease and your landlord’s requirements for ceiling or wall fixings.

How do I choose the right cord length?

Measure from the outlet along the intended wall and ceiling route, then include the drop to the fixture. Allow for bends as instructed, and compare the total with the model’s usable cord length. Cord length varies by product.

Can I use a plug-in pendant anywhere?

The location needs a compatible outlet, suitable mounting, a safe cord route and the conditions specified for the model. Bathroom and outdoor use require the appropriate product rating; plug-in does not imply suitability for these locations.

Questions? Email support@monulo.com.